ALUMINUM ROOF COATING
The ALUMINUM ROOF COATING is a thick, homogeneous coating made of elastomeric bitumen, volatile solvents, and reflective aluminum pigments. It restores and protects metal surfaces from corrosion: roofs, cladding, storage tanks, water ducts, etc. This product can also be used to revitalize aging traditional asphalt roofs.
Benefits
- Allows to reduce surface temperature by protecting it from UV rays
- Restores and protects metal surfaces
- Can be applied on different surfaces, such as asphalt roofing
Tests and certifications
Properties
Function
Waterproofing
Product Roles
Coatings
Building Component
Roofs
Technology
SBS modified bitumen
Characteristics
Substrates
- Metal
- Asphalt roof
Application
- Paint brush applied
- Rolled
- Sprayed
Service temperature
-40 °C to 80 °C (-40 °F to 176 °F)
Instructions
Service life (Storage)
3 years
Storage instructions
Store in its original, closed packaging, in a cool, well-ventilated area with a temperature up to 40 °C (104°F). Can withstand freezing.
Minimum application temperature
0 °C (32 °F)
Tools required
- Paint brush
- Roller
- Sprayer
Surface Preparation
The substrate must be clean, dry, and free of dust, grease or other contaminants.
Warnings
Keep out of the reach of children. Properly close the container after each use. Store in a closed room, well ventilated by forced ventilation if necessary, and provide supervision from outside. Harmful if swallowed, inhaled, or in contact with skin. During use, keep away from ignition sources. Do not smoke. After application, keep away from flames until the solvent has evaporated. Do not pour residues in drains.
Restrictions
If the surface being treated is cracked or has holes, clean the surface, apply EXTERIOR PRIMER and repair with an ALUMINUM WATERPROOFING MEMBRANE. The coating may be applied to a previously coated substrate. However, it is not advisable to apply a paint coating. Do not apply in wet weather, when there is risk of condensation. It is not recommended to use a product containing bitumen directly on softwood boards or flexible polyvinyl chloride.
Cleaning
Clean wet tools with water. When dry, clean with petroleum solvents, such as mineral spirits, Varsol, and xylene
Previous identity
Conditioning
Products
Product code
Packaging
Coverage
Weight
Weight per skid
ROOF ALUMINUM COATING
Product code
34015
Packaging
18 l (4.8 gal)
Coverage
36 to 90 m² (384 to 969 ft²)
Weight
23.54 kg (51.91 lb)
Weight per skid
1,105 kg (2,436 lb)
Without box
ROOF ALUMINUM COATING
Product code
34005
Packaging
3 l (0.8 gal)
Coverage
6 to 15 m² (64 to 162 ft²)
Weight
3.97 kg (8.75 lb)
Weight per skid
638 kg (1,405 lb)
With box
Palletization
Products
Barcodes
Product code
Units per box
Units per skid
Boxes per skid
Weight per skid
ROOF ALUMINUM COATING
Barcodes
6 23680 34015 2
Product code
34015
Units per box
Units per skid
36
Boxes per skid
Weight per skid
1,105 kg (2,436 lb)
ROOF ALUMINUM COATING
Barcodes
6 23680 34005 3
Product code
34005
Units per box
2
Units per skid
150
Boxes per skid
75
Weight per skid
638 kg (1,405 lb)
